The magical missing diode

HI


the following information is in regards to the last diode which populates the added holes with no traces.

look at the picture



what a mess but it should help . look where it says "hexfuz" backwards. place the end of the diode with the stripe (cathode) into one of the holes with no trace and teh other end (anode) into the unpopulated hole that should be above the "z". if you can make out the semi retarded red diode in the picture it shows correct orientation.

NOW the last wire that you didnt connect on your stomp switch goes into the other hole with no trace (labeled MILB on the diagram). solder the anode (striped end) of the diode to the new wire under the board to simulate a trace. this is depicted in my diagram by a neon green "u" shaped blob.



congratulations thats the end of this procedure.

Completion....

Hi

when you have a moment please "vote" for yourself on the new poll if you have completed your pedal so that we can get an idea of whats going on.


please do not vote for people other than yourself.

Led Wiring DIagram

Hi

A lot of people are reporting not getting an email i sent out on march 20. So if you did not get it please read all the recent updates on this site. The LED is here now and you can call me to arrange meeting up. I live near sherbrooke or st laurent metro and i am at concordia everyday in the week as well.


and so...


Here is some info on how you will wire the LED to get it red in one mode and green in the other.

You may or may not have already put 2 wires in the holes i have circled and labelled A and B. If you haven't you should do so now.



Wire A will go to the Middle pin on the LED.

Wire B will go to the middle pole on the unused side of your switch.



Now, the final touch is to connect each of the outer pins on the LED to each of the outer pins on the same side of the switch that wire B is connected to.

and thats all.

if you reverse left and right all that will change is which position of the switch is which color. it will work either way.